guide tube
英 [ɡaɪd tjuːb]
美 [ɡaɪd tuːb]
网络 导管; 导向管; 引导管
双语例句
- Numerical simulation of the gas phase flow field in inlet annular space of a guide vane cyclone tube
导叶式旋风管入口环形空间内气相流场数值模拟 - Effect of Particle Size Distribution of Inlet Particle on Separation Efficiency in Guide Vane Cyclone Tube
导叶式旋风管入口颗粒粒度分布对分离效率的影响 - Pull guide tube out of the oil guide housing.
将导管从机油导流壳中拔出。 - In the event of a complaint, remedy the situation by replacing the metal guide tube.
如遇投诉，可通过更换金属导管来解决此状况。 - Maintenance: Both cylinder bore and cylinder head valve guide tube can be repaired by resisting.
大修：缸孔可采用镶缸套形式重修，缸盖气阀导管也可采用镶套形式重修。 - Remove the oil dipstick from the guide tube for the assembly work.
从导管上拆下装配时使用的油尺。 - A draft tube for quick exhaust comprises a tube body, a perforated pipe, a guide hole tube, a helical blade set, a trepanning cover and two bearings.
一种快速抽排的导流管，包括管体、多孔管、导孔管、螺旋叶片组、套孔盖、二轴承； - The anesthetic guide tube ensures that each cross section of the entire tube body has marking color and is easy to distinguish, thereby having excellent use effect.
本实用新型使得整个管体的各截面均有标记色，容易分辨；应用效果好。 - The adjustable suction pot comprises a suction pot, a guide tube, an air extracting device and an adjusting valve.
本实用新型由吸罐、导管、抽气装置、调节阀组成。 - Application of Magnetic Memory Testing to Butt Weld of Guide Steam Tube
磁记忆检测技术在导汽管对接焊缝中的应用 - Remove the oil dipstick from the guide tube to facilitate installation.
将油尺从导管上拆下以便于安装。 - Experimental Study on Flow Pressure Drop Reduction of the Exit Tube in the Guide Vane Cyclone Tube; sectional flight conveyer
导叶式旋风管排气芯管内流动减阻的实验研究分组螺旋叶片式输送器 - Slipway of Guide Tube Frame Structural Design of the Wharf
拖拉导管架滑道及出运码头结构设计 - Seedling guide tube is a key component of the seedling throwing transplantation to accomplish orderly throwing and transplanting.
导苗管是水稻抛秧机实现有序抛栽的一个关键部件。 - Study on the Particle Separation Model in the Guide Vane Cyclone Tube
导叶式旋风管内颗粒分离模型的研究 - Forming of Zr-4 alloy guide tube with varied diameter
锆合金变径导向管成型研究 - Therefore it is main purpose for studying low twist rotor spun that increasing the twist and increasing the strength of yam of the zone from the rotor to guide tube.
因此增加转杯至引纱管区域的捻度，提高该纱段的成纱强力是低捻转杯纺纱的主要关键。 - Study on Forming Technique for Necking Parts of Zircalloy-4 Guide Tube for Nuclear Reactors
核反应堆用锆-4合金导向管缩径段成型工艺研究 - In order to improve the separation mechanism of guide vane cyclone tube, the effect of particle size distribution of the SiO2 particles on the separation efficiency and grade efficiency was investigated.
为深入研究导叶式旋风管的分离机理，用不同粒度分布的SiO2颗粒对分离总效率与粒级效率进行了对比研究。 - In this paper, adhesive wear is analyzed by example of unit accident caused by nibble and bite damage on guide tube of hydroturbine guide vane servomotor and correspondent preventing is given.
本文以水轮机导叶接力器导管的啃伤咬死造成的机组事战为例，主要从粘着磨损方面进行了分析，并提出了相应的防范措施。 - The experimental study of bridging of peripheral nerve defect by chitosan-NGF nerve guide tube
含神经生长因子的壳聚糖导管桥接周围神经缺损的实验研究 - Theoretical analysis shows that the radius of construction disturbance zone in the soft clay ground is about 1.2 times of that of the plastic zone and 9 times of that of the guide tube of vertical drainage bodies.
计算表明扰动区半径可取塑性区半径的1.2倍，扰动区半径约为竖向排水体导管半径的9倍。 - Combined with the strong longitudinal electric component for any focused laser field, an acceleration channel is formed, which shows similar characteristics to that of a wave guide tube of conventional linear accelerators.
同时聚焦光场总存在着电场的纵向分量，这两者的结合便在激光场中形成了一个天然的加速通道，与我们通常所见的线性加速器中的波导管非常相似。 - Application of Naro Brush Electroplating Technology To Repairing of Engine Valve Guide Tube Hole
纳米电刷镀技术在发动机气阀导管孔修理中的应用 - METHODS The agar cavity experiment and the experiment of bacteriostatic activity of the guide tube in the nutrient meat broth were made.
方法用琼脂腔试验法和导管在营养肉汤中的抑菌活性试验测定导管的抗菌性能。 - Effect of Exit Structure on the Separation Performance of the Guide Vane Cyclone Tube
排气结构对导叶式旋风管分离性能的影响 - After analysing the characteristics of gun reamers, author presents the de-sign and fabrication of gun reamers for valve guide tube, In addition, in regard to cutting cone and guide block form as well as geometric parameters, practical tests are carried out.
作者在分析了枪铰的特征后，根据该厂加工条件，设计制造了气门导管孔枪铰，并对切削锥和导向块的形式以及几何参数进行了使用验证。 - Naro brush electroplating technology was employed to repair the hole of diesel engine valve guide tube using n-Al2O3/ Ni nanocomposite solution. The difficulties of plating for small diameter holes and uneven deposit were solved. The wear tests were carried out.
应用n-Al2O3/Ni纳米颗粒复合电刷镀技术修理了柴油发动机气阀导管孔，解决了工件孔径小镀积不均匀等难题，并进行了现场耐磨性试验。 - The original purpose is to reduce the diameter of Guide Steam tube, to simplify the structure and reduce the pressure drop of system, then to uniform flow distribution.
其本意为减小导汽管直径，简化系统布置，减小系统压降，增强并联管组流量分配的均匀性。